A
-
Abedini, Aliakbar
Effect of quenching and partitioning process on the microstructure and tensile properties of medium carbon high silicon steel [Volume 33, Issue 2, 2022, Pages 59-72]
-
Akrami, Negar
“The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
-
Alesafar, Azin
The Desired Strength of Al-Si-Cu Alloy Closed Cell Foam and Its Comparing with the Strength of Ship’s Fresh Bone [Volume 33, Issue 1, 2021, Pages 25-48]
-
Aliadeh, Ali
Investigating Mechanical Behavior of Al A356-B4C / TiB2 Composite Produced by Stir Casting [Volume 33, Issue 2, 2022, Pages 41-58]
-
Aliadeh, Ali
Experimental Investigation Thermal and Mechanical Behavior of Ni/Al Reactive Composites Synthesized by Mechanical Alloying [Volume 33, Issue 3, 2022, Pages 37-52]
-
Alipour, Mohammad
The effect of age hardening heat treatment (T6) on the microstructure and wear behavior of Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with graphene nano plates [Volume 33, Issue 4, 2022, Pages 13-26]
-
Alipour, Mohammad
Investigating the effect of the amount of reinforcement on the compressive strength of A380 aluminum alloy nanocomposite reinforced with silicon carbide nanoparticles [Volume 33, Issue 4, 2022, Pages 27-38]
-
Ardestani, Mohammad
Effect of laser line interruption on the structure and magnetic properties of GO-silicon-steel-sheets in the laser scribing process [Volume 33, Issue 2, 2022, Pages 147-160]
-
Azadi, Mohammad
Sensitivity Analysis of Ageing Parameters on Properties of AZ91 Magnesium Alloy by Regression Method [Volume 33, Issue 1, 2021, Pages 49-70]
-
Azadi, Mohammad
Sensitivity Analysis of Solutioning Time, Ageing Temperature, and Clay Nano-Particles Addition on Hardness of Piston Aluminum-Silicon Alloy using Regression Method [Volume 33, Issue 4, 2022, Pages 67-94]
-
Azimaee, Hamid Reza
On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
B
-
Bagherzadeh Ghazi, Seyyed Reza
Anodic Dissolution of Used Nickel-Base Superalloy U-500 in Sulfate Media for Recycling of Ni, Co and Cr [Volume 33, Issue 3, 2022, Pages 67-82]
-
Bahmanabadi, Hamed
Sensitivity Analysis of Solutioning Time, Ageing Temperature, and Clay Nano-Particles Addition on Hardness of Piston Aluminum-Silicon Alloy using Regression Method [Volume 33, Issue 4, 2022, Pages 67-94]
-
Bahmani oskooee, Mehdi
Investigation of the effect of copper addition on the phase equilibrium and the microstructure of 410s stainless steel [Volume 33, Issue 2, 2022, Pages 173-184]
-
Bayani, Hessam
Effect of laser line interruption on the structure and magnetic properties of GO-silicon-steel-sheets in the laser scribing process [Volume 33, Issue 2, 2022, Pages 147-160]
D
-
Darvishian Haghighi, Faezeh
Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation [Volume 33, Issue 3, 2022, Pages 53-66]
E
-
Ebrahimi Kahoo, Zeinab
“The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
F
-
Faeghinia, Aida
Effects of Carbonates, Carbon, Chromium Oxide and SiC Compositions On Steel Slag Sintering [Volume 33, Issue 2, 2022, Pages 13-24]
-
Farhadinia, Faranak
Effect of nano clay and carbon nano-tube on the glass fiber- epoxy hybrid composites [Volume 33, Issue 1, 2021, Pages 1-14]
G
-
Ghabooli, Mehdi
Synthesis and study of the pH effect on the antibacterial activity of ZnSe nanoparticles against the Escherichia coli and Pseudomonas aeruginosa gram-negative bacteria by using disc-diffusion bioassay [Volume 33, Issue 1, 2021, Pages 15-24]
-
Ghanad, Mehrnoosh
“The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
-
Ghasemi Banadkouki, Seyed Sadegh
Superior Improvement of Microstructure and Mechanical Properties of a Medium Silicon Low Alloy 35CHGSA Steel Under Quenching and Partitioning Heat Treatment in Comparison to Conventional Quenching and Tempering Condition [Volume 33, Issue 2, 2022, Pages 73-91]
-
Ghorbanzadeh, Milad
Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method [Volume 33, Issue 1, 2021, Pages 145-156]
-
Golmohammadi, Morteza
Synthesis and characterization of bentonite-SnO2 nanocomposite in supercritical water environment [Volume 33, Issue 1, 2021, Pages 87-96]
-
Golmohammadi, Morteza
Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method [Volume 33, Issue 1, 2021, Pages 145-156]
-
Golmohammadi, Morteza
Investigation on the Presence of Titanium Oxide particles Effect in Preventing the Growth of NiTi Granules in the Sintering Process [Volume 33, Issue 3, 2022, Pages 11-24]
J
-
Jahangiri, Mohammadreza
Effect of laser line interruption on the structure and magnetic properties of GO-silicon-steel-sheets in the laser scribing process [Volume 33, Issue 2, 2022, Pages 147-160]
-
Javdaneh, Foad
Effect of nano clay and carbon nano-tube on the glass fiber- epoxy hybrid composites [Volume 33, Issue 1, 2021, Pages 1-14]
-
Johari, Narges
Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method [Volume 33, Issue 1, 2021, Pages 97-106]
K
-
Kargozar, Saeid
“The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
-
Khajeh Mahmoodi, Sahar
Investigation of microstructure and mechanical properties of dissimilar joints between AISI 321 stainless steel and X65 high-strength low-alloy steel [Volume 33, Issue 1, 2021, Pages 71-86]
-
Khayyat, Masoumeh
Investigating the effect of brazing time and temperature on stainless steel sandwich joints [Volume 33, Issue 4, 2022, Pages 53-66]
-
Khoshhal, Razieh
Thermodynamic and practical study of iron silicon phases that can be produced from iron and silicon powder systems [Volume 33, Issue 2, 2022, Pages 161-172]
M
-
Mardi, Hossein
Effects of Carbonates, Carbon, Chromium Oxide and SiC Compositions On Steel Slag Sintering [Volume 33, Issue 2, 2022, Pages 13-24]
-
Mirbagheri., Seyyed mohammad hossein
The Desired Strength of Al-Si-Cu Alloy Closed Cell Foam and Its Comparing with the Strength of Ship’s Fresh Bone [Volume 33, Issue 1, 2021, Pages 25-48]
-
Mirjalili, Mostafa
On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
-
Mirjalili, Mostafa
The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion [Volume 33, Issue 2, 2022, Pages 93-110]
-
Moaveni, Sahar
Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation [Volume 33, Issue 3, 2022, Pages 53-66]
-
Mohaghegh Nejad, Saeid
Synthesis and study of the pH effect on the antibacterial activity of ZnSe nanoparticles against the Escherichia coli and Pseudomonas aeruginosa gram-negative bacteria by using disc-diffusion bioassay [Volume 33, Issue 1, 2021, Pages 15-24]
-
Mohammadi, Ali
Investigating the effect of the amount of reinforcement on the compressive strength of A380 aluminum alloy nanocomposite reinforced with silicon carbide nanoparticles [Volume 33, Issue 4, 2022, Pages 27-38]
-
Mohammadi Moqaddam, Mahsa
The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion [Volume 33, Issue 2, 2022, Pages 93-110]
-
Mokhtari Shirazabad, Mehdi
Sensitivity Analysis of Ageing Parameters on Properties of AZ91 Magnesium Alloy by Regression Method [Volume 33, Issue 1, 2021, Pages 49-70]
-
Mosalman, Sina
Investigation on efficiency of analytical relations to predict the properties of reinforced nanocomposites [Volume 33, Issue 1, 2021, Pages 107-124]
N
-
Nasiri, Hadi
Synthesis and characterization of bentonite-SnO2 nanocomposite in supercritical water environment [Volume 33, Issue 1, 2021, Pages 87-96]
-
Nasiri, Hadi
Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method [Volume 33, Issue 1, 2021, Pages 145-156]
-
Nasiri, Hadi
Investigation on the Presence of Titanium Oxide particles Effect in Preventing the Growth of NiTi Granules in the Sintering Process [Volume 33, Issue 3, 2022, Pages 11-24]
-
Nazarnezhad, Simin
“The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
-
Norouzifard, Vahid
Effects of precipitation hardening heat treatment conditions on the microstructure, mechanical properties, and electrical conductivity of Cu - 0.4%Cr alloy [Volume 33, Issue 2, 2022, Pages 25-40]
O
-
Ojaghi-Ilkhchi, Mehdi
Anodic Dissolution of Used Nickel-Base Superalloy U-500 in Sulfate Media for Recycling of Ni, Co and Cr [Volume 33, Issue 3, 2022, Pages 67-82]
-
Ostovan, Farhad
Microstructure and Mechanical Properties of A283 Steel Coated by Inconel 625 and 347 Steel Using GTAW [Volume 33, Issue 1, 2021, Pages 125-144]
R
-
Rafati, Fatemeh
Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method [Volume 33, Issue 1, 2021, Pages 97-106]
-
Rash-Ahmadi, Samrand
Investigation on efficiency of analytical relations to predict the properties of reinforced nanocomposites [Volume 33, Issue 1, 2021, Pages 107-124]
-
Rastegary, Habibollah
Effect of quenching and partitioning process on the microstructure and tensile properties of medium carbon high silicon steel [Volume 33, Issue 2, 2022, Pages 59-72]
S
-
Sahebian, Samane
Synthesis and characterization of cobalt ferrite magnetic nanoparticles by chemical co-precipitation method [Volume 33, Issue 4, 2022, Pages 1-12]
-
Sahebian, ُSamane
The Study of Fatigue Behavior of Glass Fiber Reinforced epoxy(GFRP) Composite Under Different Stress Levels [Volume 33, Issue 2, 2022, Pages 1-12]
-
Sajjadi, Abdolkarim
On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
-
Sajjadi, seyed abdolkarim
Synthesis and characterization of cobalt ferrite magnetic nanoparticles by chemical co-precipitation method [Volume 33, Issue 4, 2022, Pages 1-12]
-
Sajjadi, Seyed Abdolkarim
Superior Improvement of Microstructure and Mechanical Properties of a Medium Silicon Low Alloy 35CHGSA Steel Under Quenching and Partitioning Heat Treatment in Comparison to Conventional Quenching and Tempering Condition [Volume 33, Issue 2, 2022, Pages 73-91]
-
Salehifar, Mehran
Effect of Intercritical Annealing Temperature on the Tensile Behavior of JIS-SAPH440 Steel [Volume 33, Issue 3, 2022, Pages 25-36]
-
Samadi, Ahad
Anodic Dissolution of Used Nickel-Base Superalloy U-500 in Sulfate Media for Recycling of Ni, Co and Cr [Volume 33, Issue 3, 2022, Pages 67-82]
-
Sarfaraz, Mahla
On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
-
Sedghi, Arman
Effect of nano clay and carbon nano-tube on the glass fiber- epoxy hybrid composites [Volume 33, Issue 1, 2021, Pages 1-14]
-
Sharifitabar, Mahmood
Investigation of microstructure and mechanical properties of dissimilar joints between AISI 321 stainless steel and X65 high-strength low-alloy steel [Volume 33, Issue 1, 2021, Pages 71-86]
-
Soleymani, Farzad
Evaluation of biodegradability and electrochemical behavior of magnesium-aluminum alloy AZ91 with bio-nanocomposite membrane [Volume 33, Issue 4, 2022, Pages 39-52]
-
Souri, Dariush
Synthesis and study of the pH effect on the antibacterial activity of ZnSe nanoparticles against the Escherichia coli and Pseudomonas aeruginosa gram-negative bacteria by using disc-diffusion bioassay [Volume 33, Issue 1, 2021, Pages 15-24]
T
-
Tayarani Najaran, Zahra
Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation [Volume 33, Issue 3, 2022, Pages 53-66]
V
-
Vahdati Khaki, Jalil
The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion [Volume 33, Issue 2, 2022, Pages 93-110]
Z
-
Zabett, Ahad
The Study of Fatigue Behavior of Glass Fiber Reinforced epoxy(GFRP) Composite Under Different Stress Levels [Volume 33, Issue 2, 2022, Pages 1-12]
-
Zohari, Faezeh
Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method [Volume 33, Issue 1, 2021, Pages 97-106]
Your query does not match with any item